Ознакомьтесь с нашей политикой обработки персональных данных
  • ↓
  • ↑
  • ⇑
 
Записи с темой: teaching (список заголовков)
03:01 

TUTORIAL: Piano-Shirt

I've conducted the following Piano-Shirt workshop for a Nerd Rider event in February. I am  also going to incorporate it a Soft Synth workshop it in September in the Victoria and Albert Museum London, which I'm gonna be leading together with my beloved Emilie Giles!

 Below is a short step-by-step tutorial explaining how to make your own piano-shirt. You will need:

- LilyPad SimpleSnap with lithium battery
- Speaker  8 Ohm
- sewable LED
- conductive thread
- conductive fabric
- normal thread
- metal poppers with holes, 9mm
- double-sided Bondaweb (Ger: B


@темы: wearables, soft circuit, physical computing, etextiles, capacitive sensing, Workshop, Teaching

17:12 

Wearables Workshop Development and Conduction: my seminar at the LMU





During the last week of February I was teaching a seminar on wearable technology and education for the third time in a row. This course was a collaboration with Dr. Karin Guminski and Michael Dietrich from SPIELkultur, and Simone Damm was assisting us this year.
All pictures on this page are courtesy of the seminar participants or Anna Blumenkranz

We had an intense week, during which the students had to come up with a workshop idea and produce it: acquire all necessary materials and tools, make an instruction, and after assessing the workload for their target group pre-produce different parts and steps. The next week after the course we went into a school and conducted these workshops with the 5th and 7th grade kids during two afternoons.

One of the challenges this year was having the double amount of students on the course: 24 instead of 12... And another trouble was that I had a flu and completely lost my voice on the second day. Which is not the most convenient thing for a teacher. On the last day of the course, my co-teachers had to act as my voice and read or say out loud what I was meaning to tell everyone in the classroom. Human amplifiers :)























On the technical side, this year I've introduces the students to ATTiny85, as I wanted them work with sound. ATTinys are little micro-controllers, which only cost 1,50€ in the eHaJo-shop! A great price for a computer. Similar to an arduino, you can address different pins through code, and attach sensors and actuators to them. Here is what we were doing during the first one and a half days:

STEP1: I've used Arduino Uno to programme the ATTinys (thanks to Hannah Perner-Wilson for a fantastic tutorial). I've used the following code for the Super Mario tune, and this one for the Star Wars tune, and adjusted both slightly.

STEP2: I've made the following swatch to demonstrate the circuit. I intentionally left it as basic as possible, as I didn't want to influence the students' future designs in any way. The circuit uses a 3V battery as a power source, the ATTiny chip soldered onto a piece of stripboard to control everything, a piezo for the buzzing audio output and a standard LED for the light, and two popper switches to open the circuit.



















I was very pleased with some of the students' ideas and designs, which extended my circuit and incorporated it in various designs, making them attractive for 10-12-year-olds! There were sock puppets, Minion smartphone pockets with stretch sensors, school book covers with owls, bags with printed tape recorders to switch on and Super Mario mushrooms















@темы: LMU, Teaching, Workshop, etextiles, physical computing, soft circuit, tutorial, wearables

18:30 

T-Shirt Piano at Nerd Rider



photo by FormatD
End of February I've been invited to lead a whole-day event on wearables as part of the Nerd Rider event series. Prior to the workshop I gave a one-hour lecture on the history of e-textiles, with insights into various political and social arts projects in this realm. Afterwards the participants had a technical introduction into Arduino Lilypad microcontroller and its programming. And then they went on to design and sew their very own T-Shirt piano.

photo by FormatD
photo by FormatD
photo by FormatD
I loved doing a whole-day workshop, as you can squeeze in very diverse input. Although the time never seems to be sufficient, and I wish we had a whole week together. And I thoroughly enjoyed the workshop participants, their contagious enthusiasm, and their various skills and backgrounds ranging from textile designers for BMW and space engineers to ambitious high-school grads.


A huge thank you to the organizers - Format D, who took over the whole event management and materials, registration, space set-up, and, and and. They had to do some late-night shifts to make this event happen. Thanks to Christian, Benno & Catherina!

photo by FormatD



@темы: etextiles, Workshop, Teaching, Media Art, Geekery, wearables, soft circuit, physical computing, maker culture

17:36 

Solar Hood

Initially I wanted to build a flexible solar phone charger, to roll it out and attach to the top of your backpack and charge your phone on the go with green energy. But then I considered the costs and the challenges, and went for a playful option.

So here is a brief tutorial on how to make your own solar hood, or whatever you want to attach it to.

Collect your Materials.
You will need:

- solar motor
- solar cell 
- 3V coin battery
- battery holder
- conductive fabric
- conductive thread
- velcro
- fusible interfacing (in German: Vliseline. A double-sided sticky material for ironing two pieces of fabrics onto each other)
- something light like feather or small leaves
- felt

















STEP 1: Plan your circuit. Position your motor, battery, solar cell and velcro switches, and draw the connection, so that you're able to switch the energy source.
STEP 2: Make your motor wearable.
Depending on your motor shorten the wires, remove the isolation and form a loop. Solder this wire loop to a metall popper. Repeat for the second piece of wire.

I used a different motor for my circuit, with wires thick and stable enough to be sewn directly into the fabrics. So I used plastic poppers as an addition, as on the very first picture. Play around with yours!
 Make a felt holder for your motor. If your felt is thin or your motor rather tall, put two layers of felt together. Cut out a form which covers your motor and add two symmetrical "legs" on the bottom.
Secure the two layers with pins and cut it out. Then sew the two layers together.


Wrap the felt holder around your motor and secure it with a pin. Take the motor out and sew the holder together. Take conductive thread and sew metal poppers onto the "legs" of your holder.

Attach a feather or anything light with hot glue to the very top of your motor. This way you'll see the movement of your motor immediately. Be careful not to put too much glue, otherwise it will be too heavy for your motor, and it won't rotate.


STEP 3: Make your solar cell wearable. 
Strip the isolation off a piece of wire and form a loop with pliers. Then cut off this piece. Repeat for another three pieces. Then solder two loops onto the plus and minus contacts in the corners. And glue the other two loops with a hot glue gun onto the opposite corners.

































STEP 4: Assemble your circuit. 
Now place all your components on your piece of felt according to your circuit plan, and mark their position with a pen.



Draw your circuit connections on a piece of your fusible interfacing, then put it on a piece of conductive fabric. The paper side of it should be facing you.

Note! The lines on the fusible interfacing paper will be mirrored later, so consider this for your circuit.


 Then iron the fabric.














 

 Cut out your lines.
 Peel the paper off and put your conductive connectors on the felt. Iron them onto it.







 
 Establish connections to your components by sewing them onto conductive fabric with conductive thread. Make sure your connections are tight enough. Otherwise there will be an unstable contact.








 STEP 5: Make a velcro-switch.
 Sew the bottom-side of velcro onto the end of your battery connection with conductive thread. Make sure to establish a good connection. Do the same for the solar cell connection. Then sew the third bottom part with normal thread, to make an off-mode for your switch.

Sew the other two metal poppers into your circuit for your motor holder. Thread through one of the poppers with conductive thread and stitch through the upper part of velcro, so that it's moveable and long enough to touch each of the three bottom velcro parts.

Now attach your motor holder.




Here are two examples made during the workshop:


This workshop is inspired by Kobakant's Solar T-Shirt, though in the end I chose to simplify the circuit and make it possible to switch between different power options. Also, I'd like to thank Hannes from eHaJo for helping me with electric troubleshooting!

Creative Commons License
Solar Hood by Anna Blumenkranz is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Based on a work at http://www.kobakant.at/DIY/?p=2763.


@темы: wearables, tutorial, solar, soft circuit, motor, etextiles, Workshop, Teaching, Geekery

15:34 

Make Munich 2016



Last weekend I was leading a new workshop called "Thread the Sunshine In!" at this year's Make Munich. We were integrating a solar motor into a soft circuit, which would run either from a solar cell if the weather allows it, or from a 3V coin cell battery. Everything was sewn onto a piece of felt with velcro or buttons around the corners, so that you could be flexible and attach your solar motor to your hood, backback, shirt or whatever is well exposed to sun beams.


 

This time the workshop was slightly different for me and for everybody else. We were being filmed by BR for a short video on the TV. Same week before the workshop I've been interviewed in my studio about women and the maker movement. The video is still available here.













This year's Make Munich was huuuge! It moved to Zenithhalle, which is three times as bis as Tonhalle. So there were even more makers, visitors, events, robotic competitions, 3d printers, etc. etc. than previously.

Many thanks to the organisers Martin & Jenny, all the volunteers, and especially a guy from Munich Maker Lab who spontaneously assisted me throughout the whole workshop with soldering, gluing and taking most of the above pictures! Such an amazing support, thank you so so much!




@темы: Geekery, Make Munich, Munich, Teaching, Workshop, etextiles, make, maker culture, motor, soft circuit, solar, wearables

15:51 

Musik M

Two weeks ago I held a new wearable workshop at FabLab Munich. The idea is simple: we've been integrating headphones directly into a winter hat. It keeps you warm while you are listening to your favourite tunes.

I had literally only two days prep time, because the little one brought a  nasty stomach bug from the kindergarten... So here is a short tutorial / documentation:



Step1: Take your headphones apart. (You'll need the ones with big speakers, not the ones you push directly into your ears.) If necessary, remove all screws and break off the plastic to free the speakers from the frame. Tape the speakers around the edge to cover up any sharp plastic edges.





Step 2: Integrate speakers into your hat. Make felt pockets to hold your speaker on the inside. If you want to hide the cable as well, cut into the hat (not the head! ;)) and thread the cable through the hole. Then stitch everything together again. The cable should run through the back of your hat.





Step 3. Add your design. I've made a fox, hoping that it would make it appealing for kids. And I hid the rest of the cable in a loooong sausage of felt. Voil


@темы: wearables, soft circuit, Workshop, Teaching, Media Art, FabLab

19:40 

Wearables: Workshop Production and Practice

This February I tought a blocked week-long seminar at the LMU, in collaboration with Karin Guminski as well as Michael Dietrich from SPIELkultur. On this course the students were introduced to the basic techniques of wearable electronics. They were then split in three groups. The rest of the time was spent on brainstorming and workshop development, acquisition of materials, planning, designing, etc. On the last day of the seminar we went to Nymphenburger Gymnasien to test out the workshops with the students' of the 10th grade there. It was a very exciting experience for the students on the course, they mastered the whole day brilliantly and enjoyed teaching a lot. Here is a much better report about the seminar by one of my lovely students Teresa Biersack. (Sorry it's in German.) But hopefully it gives you an idea about the whole seminar.





 


  bn










Thousand thanks to everyone involved! It was a huge fun and worked out really well for all students!




@темы: LMU, Media Art, Teaching, Workshop, wearables

21:42 

ANTWORT DER DINGE - an audio hacking workshop at Lothringer13

Last spring I held a one-day workshop in collaboration with a textile artist Stefan Wischnewski. The workshop was supplemental to the exhibition "The Answer of Things" at the city gallery Lothringer 13. It was a fun day of tinkering with kids with an experimental approach to electronics and its strict rules. Definitely a new experience for me!














@темы: wearables, soft circuit, Workshop, Teaching, Munich, Media Art, Geekery

14:42 

Fairy-tales-telling Bags - Workshop with Stadtbibliothek Milbertshofen

This is a workshop I've been doing at the Situlischule in North Munich end of February, assisted by the super talented Fanny. It was commissioned by Stadtbibliothek Milbertshofen as part of their programme "Echt Sch


@темы: Media Art, Munich, Teaching, Workshop, soft circuit, wearables

16:31 

Edible Keyboard - maKey maKey Workshop for KJR Fachtag

So as I already mentioned in the previous post I had to take a cab in London at 3am, in order to get the train to Gatwick, to get the 6.20am flight to Munich, take the S-Bahn from the airport, run into my place and grab everything for the workshop, rush after the next S-Bahn to Pullach to get to the workshop on time :) 

Set in a beautiful castle, my maKey maKey workshop was part of the New Media conference for  Kreisjugendring employees (a huge pedagogical organisation in Munich) on 21 February.
























To get started after an introduction to technical maKey maKey details, we constructed a playground on the floor for a simple colour game in Scratch, in which participants were making one of the electrical connections by stepping with their bare feet on a piece of foil, and the other by touching their team partner. We had lots of fun!

The next task for the young teachers was to design an interactive environment, which would involve the objects in the room. It was inspired by this amazing HacKIDemia musical room project in Austin. One of the teams wired up the whole buffet Alice-in-Wonderland-style, making touch-sensitive giggling fruits, musical coffee cups and other drinks, etc. The second team adjusted some of the audience's chairs, but adding buttons and foil to it, so that the chairs would laugh out loud when touched. These creations caused a big confusion, once everybody gathered in the hall, coming back from all the other workshops to share their experiences.



In the end every workshop group presented their results to each other. So my group decided to let everybody play the bare-feet colour game once again ))

It was a very joyful workshop with inspiring participants, and despite a sleepless night I did not feel tired at all. Great fun! Thank you so much Alice for organising the whole day, for inviting me and for taking part yourself as well!




@темы: Geekery, Media Art, Munich, Teaching, Workshop

16:31 

Edible Keyboard - maKey maKey Workshop for KJR Fachtag

So as I already mentioned in the previous post I had to take a cab in London at 3am, in order to get the train to Gatwick, to get the 6.20am flight to Munich, take the S-Bahn from the airport, run into my place and grab everything for the workshop, rush after the next S-Bahn to Pullach to get to the workshop on time :) 

Set in a beautiful castle, my maKey maKey workshop was part of the New Media conference for  Kreisjugendring employees (a huge pedagogical organisation in Munich) on 21 February.
























To get started after an introduction to technical maKey maKey details, we constructed a playground on the floor for a simple colour game in Scratch, in which participants were making one of the electrical connections by stepping with their bare feet on a piece of foil, and the other by touching their team partner. We had lots of fun!

The next task for the young teachers was to design an interactive environment, which would involve the objects in the room. It was inspired by this amazing HacKIDemia musical room project in Austin. One of the teams wired up the whole buffet Alice-in-Wonderland-style, making touch-sensitive giggling fruits, musical coffee cups and other drinks, etc. The second team adjusted some of the audience's chairs, but adding buttons and foil to it, so that the chairs would laugh out loud when touched. These creations caused a big confusion, once everybody gathered in the hall, coming back from all the other workshops to share their experiences.



In the end every workshop group presented their results to each other. So my group decided to let everybody play the bare-feet colour game once again ))

It was a very joyful workshop with inspiring participants, and despite a sleepless night I did not feel tired at all. Great fun! Thank you so much Alice for organising the whole day, for inviting me and for taking part yourself as well!




@темы: Geekery, Media Art, Munich, Teaching, Workshop

16:31 

Edible Keyboard - maKey maKey Workshop for KJR Fachtag

So as I already mentioned in the previous post I had to take a cab in London at 3am, in order to get the train to Gatwick, to get the 6.20am flight to Munich, take the S-Bahn from the airport, run into my place and grab everything for the workshop, rush after the next S-Bahn to Pullach to get to the workshop on time :) 

Set in a beautiful castle, my maKey maKey workshop was part of the New Media conference for  Kreisjugendring employees (a huge pedagogical organisation in Munich) on 21 February.
























To get started after an introduction to technical maKey maKey details, we constructed a playground on the floor for a simple colour game in Scratch, in which participants were making one of the electrical connections by stepping with their bare feet on a piece of foil, and the other by touching their team partner. We had lots of fun!

The next task for the young teachers was to design an interactive environment, which would involve the objects in the room. It was inspired by this amazing HacKIDemia musical room project in Austin. One of the teams wired up the whole buffet Alice-in-Wonderland-style, making touch-sensitive giggling fruits, musical coffee cups and other drinks, etc. The second team adjusted some of the audience's chairs, but adding buttons and foil to it, so that the chairs would laugh out loud when touched. These creations caused a big confusion, once everybody gathered in the hall, coming back from all the other workshops to share their experiences.



In the end every workshop group presented their results to each other. So my group decided to let everybody play the bare-feet colour game once again ))

It was a very joyful workshop with inspiring participants, and despite a sleepless night I did not feel tired at all. Great fun! Thank you so much Alice for organising the whole day, for inviting me and for taking part yourself as well!




@темы: Geekery, Media Art, Munich, Teaching, Workshop

16:31 

Edible Keyboard - maKey maKey Workshop for KJR Fachtag

So as I already mentioned in the previous post I had to take a cab in London at 3am, in order to get the train to Gatwick, to get the 6.20am flight to Munich, take the S-Bahn from the airport, run into my place and grab everything for the workshop, rush after the next S-Bahn to Pullach to get to the workshop on time :) 

Set in a beautiful castle, my maKey maKey workshop was part of the New Media conference for  Kreisjugendring employees (a huge pedagogical organisation in Munich) on 21 February.
























To get started after an introduction to technical maKey maKey details, we constructed a playground on the floor for a simple colour game in Scratch, in which participants were making one of the electrical connections by stepping with their bare feet on a piece of foil, and the other by touching their team partner. We had lots of fun!

The next task for the young teachers was to design an interactive environment, which would involve the objects in the room. It was inspired by this amazing HacKIDemia musical room project in Austin. One of the teams wired up the whole buffet Alice-in-Wonderland-style, making touch-sensitive giggling fruits, musical coffee cups and other drinks, etc. The second team adjusted some of the audience's chairs, but adding buttons and foil to it, so that the chairs would laugh out loud when touched. These creations caused a big confusion, once everybody gathered in the hall, coming back from all the other workshops to share their experiences.



In the end every workshop group presented their results to each other. So my group decided to let everybody play the bare-feet colour game once again ))

It was a very joyful workshop with inspiring participants, and despite a sleepless night I did not feel tired at all. Great fun! Thank you so much Alice for organising the whole day, for inviting me and for taking part yourself as well!




@темы: Geekery, Media Art, Munich, Teaching, Workshop

21:02 

Inspiration / Aspiration workshop for young people in London

My life has been so crazy during the last several months, with one workshop after another every week, sometimes several workshops a week, each and every one completely different, at various places and with various people. I hardly looked back at what I've been actually doing all this time, constantly racing towards the next project. But I am always happy about such intense periods of work, and also happy when they are over. 

I am going to start with the very beginning of this winter marathon, which was a workshop with my beloved Beddow n Battini collective, and another good reason to go to London! We organised a series of workshops, aimed at encouraging young people to pursue a creative career. Thus we decided to share the various skills and techniques crucial to Beddow n Battini. We conducted four workshops within two days, which included story telling by Fay, character development by Wumi, self expression by Adeeb and creative technology led by myself.








Unfortunately, our workshops were not very well promoted, and thus we ended up having only few participants, despite the fact that they were during the school holidays and free of charge. Nevertheless, it was fun and we had very interesting participants of different backgrounds who had individual stories to tell.


I was conducting a maKey maKey workshop, which is always exciting with people who haven't heard of it before. The aim was to enhance the pictures and stories created in previous workshops and add layers of interaction.



My workshop ended Thursday evening, and I had to leave my friend's flat at 3am to take the very first flight to Munich, as I was booked for another workshop there for Friday... but let that be a different story ))












Have a lovely sunny weekend everyone!


@темы: Beddow n Battini, Exploring London, Geekery, Teaching, Workshop, physical computing

23:12 

Christmas tree decorations at FabLab - 21 Decemeber

I am finally paying off my last December debt by sharing these bathed-in-the-beauty-of-the-winter-sunlight pictures and very engaged faces during my last workshop at the FabLab Munich.

I was holding this pre-Christmas session in the new space of the FabLab, who have finally moved from the cellar to this bright airy room. The participants had the choice of either making a Christmas card or a Christmas tree decoration, and everyone went for the second option (probably a bit late for cards just two days prior to the holiday).

It was the first time I had a mixed-age workshop for both kids and adults (ok, one adult, to be honest), and I was pleased to see that it worked very well. Hurray to new formats and inspiring participants! And a big thank you to Birgit & Andreas from the FabLab for the all-around support!




@темы: Geekery, Media Art, Munich, Teaching, Workshop, soft circuit, wearables

03:47 

XMAS Maker Fair


Initiated by the founders of Make Munich, XMake was a fairly spontaneous affair with little publicity. Nevertheless, the place was very crowded, and the location itself very central and bright, with fantastic panoramic views on the city and the Alps. This time I had an army of supporters, as I dragged along Ilja, Emilie and Gareth, so it was a very relaxing workshop experience for me. There were many other fun things to do, geeky and less geeky ones. You could print in 3D, bake Pl


@темы: Geekery, Media Art, Munich, Teaching, Workshop

05:09 

OSA workshop at the LMU


Wow, seems like I've been silent since October . It's time to catch up with all the exciting December things.

First of all, my lovely London friends and OSA-colleagues Emilie and Gareth were over to give my students an introduction to physical computing and a rough idea of critical thinking and methodologies. This full-weekend-workshop was a compulsory part of my current seminar "Interactive Media for Children" for art pedagogy and art & multimedia students at the LMU.

In the beginning Emilie and Gareth were telling about their background and giving insights into OSA projects and critical methods in creative practice. After half an hour it was time to unpack the newly-arrived arduinos and get everybody's hands on them! We started with the basic examples like LED blink and light-sensitive resistors (if you are about to learn arduino yourself, there are very nice examples and tutorials on the arduino webpage). We proceeded with building a bio-sensory device from OSA's previous workshop Rebooting Computing (check out the super detailed wiki-page of the project with all tutorials and background information).



By the end of the day we were introducing our personal little projects to the students, created specifically for this workshop. Unfortunately, there are no pictures, as all of us were simultaneously busy. But you can look into the code of each project here (yes, we are the open systems association!), and hopefully we'll put up some pictures soon!

On the second day the students were supposed to come up with an arduino-based project idea in groups, and prototype it within three hours. I was very impressed how quickly each group agreed upon an idea and how far all the groups got in the end! We had an anti-pollution project with a suffering planet if it was touched by the power station, or a happy planet if planted with a tree. Another project was a dating heart, used for comparing the answers of a couple. And the third one was a physical rock-paper-scissors game where you had to touch the object of your choice.


Two great days of physical computing,  British English and mostly happy faces :))) What a joy!
A big thank you to Gareth & Emilie, and also to Karin who made way for this collaboration despite the jungles of German bureaucracy.





@темы: Geekery, Goldsmiths, LMU, Media Art, Munich, Teaching, Workshop, physical computing

02:12 

Bits & Bobs

Next week is the start of the new term at the university and I'm gonna teach a newly established  seminar on Interactive Media for Children at the LMU, which involves many exciting cooperation partners! Also, I'm setting up a media theory reading group. Primarily for art & multimedia students, but basically all students and teachers you are welcome to join: computer scientists, future art educators, philosophers, sociologists and so on.
Also, me and Ilja have created a new blog called What's on in M


@темы: Workshop, Teaching, Munich, Media Art, LMU

16:57 

Back to work and autumn plans

After a short summer break I am back to town and already jumped headlong into the studio work. It's not easy to embrace this gloomy chilly rain after several months of stunning weather, but I am trying hard.

My inspiration board for the past months: El Greco, Lora Zombie, Jessica Tremp, Tania Alisova, a photograph of Dustin Hoffman,
and a fox which doesn't want to work (it only wants to snarl фыр-фыр-фыр).

To share some more inspiration with you and get you into a tinkering mood, eliciting you out of your room / office space, I'd like to invite you to the Wearable Technology workshops at the beautiful Bayerisches Nationalmuseum on the 29 of September. Or alternatively, you could send your kids away to the workshop for youngsters and have a party in their absence! During this session you will learn the basics of soft circuits, hardware hacking, sewing and soldering from three media and textile artists, and walk out with your own Speaking Bag! Get your tickets now! Here for you and here for your kids.

Something you'll learn in this workshop. Can you guess what it is?
Other goodies this autumn include lots of teaching, submissions and collaborations with lovely people. Starting from October I'll be at the LMU again, however I'll be offering a completely different course than last winter, which will be more like a patchwork of different topics, experimental tasks and external partners feeding into the whole process. I'm very excited how everything is going to evolve around it, but can't tell you more right now.

Stay tuned and have a nice week!






@темы: Arts, Geekery, LMU, Teaching, Workshop

01:32 

KIKS Kinder Kultur Sommer 2013

For the last two weeks I was working with Spielkultur again, this time at the KIKS Kinder Kultur Sommer - a festival for school children in their last week before the summer break. It was my first experience working with a whole school class and working for 9 hours almost non-stop. And I tried out many new things I have never done before: I was teaching how to programme Lego Mindstorm robots, how to create stop-motion cartoons, as well as how to draw and colour comics digitally. Have a look at the cute kids at work!

Kids working on a stop-motion film about Bavarian Simpsons in the circus. You can check out the results here.
Working on a super clever sci-fi comic
and bringing some digital colour into the hand drawn pictures
Inventing edible musical instruments with MaKey-MaKey
our venue: the Old Congress Hall






@темы: Munich, Teaching, Workshop

panda eats, shoots and leaves!

главная